Última vez editado
< `g' in Info not only to explore nodes by name, but also as another
> '''`g'''' in Info not only to explore nodes by name, but also as another
> Starting with Emacs 22, command `icicle-Info-goto-node' lets you
> type [[multi-completion]] input whose second part (after `C-M-j') is a
> content-searching pattern ([[regexp]]). This means you can search a
> set of nodes (or an entire manual) and choose from the list of
> matching nodes. The `*Completions*' candidates you see are just
> the node names. After you choose one of the matching nodes to
> visit, you can use `C-M-s' to find each match of the
> content-search pattern. See [[Icicles - Searching Named Containers]].
|Previous: Icicles - Dired Enhancements||Icicles||IciclesIndex||Next: Icicles - Support for Projects|
Icicles can help with InfoMode in these ways:
‘icicle-search’on part or all of a manual, if you flatten it first with
These features are described below.
Whenever completion is available for InfoMode commands, such as
‘Info-menu’), you can take advantage of Icicles completion. For instance, if you type
‘g yan’, you can use
‘S-TAB’ for apropos completion and choose node
‘Isearch Yank’, whose name contains
‘yan’ but does not start with it. This is an obvious and standard Icicles feature.
Although vanilla Emacs also accepts a substring as input for
‘i’, it does not provide substring or regexp completion, and it will not accept a regexp as final input.
Icicle mode binds
‘m’ to multi-commands
‘icicle-Info-menu’, which means that you can also use
‘C-mouse-2’, and so on, to browse among matching Info nodes. Unlike browsing with repeated use of `
‘i’ in vanilla Emacs, you can continue to see all of the matching candidates, in buffer
‘*Completions*’, and you need not visit the index hits in sequential order.
As usual in Icicles, you can sort completion candidates in various ways, using `
‘g’, in particular, although the default order is alphabetical, you can choose `in book order’, which shows the node candidates in the same order as in the book. In that case, using
‘g’ and then navigating among candidates sequentially using `
‘C-home’, visits the nodes in their natural order.
As a special case of this, if you use a negative prefix argument (that is,
‘M-- g’), then not only are the candidate nodes presented
‘in book order’, they are also limited to the nodes that follow your current location in the book – that is, to the remainder of the book. (A non-negative numeric prefix argument has the same meaning as for
In addition, except when you are at the
‘Top’ node, a pseudo-node `
..’ is added to the set of completion candidates. Choosing this takes you up to the parent of the current node. You can thus use
‘g’ in Info not only to explore nodes by name, but also as another means to traverse the Info menu hierarchy.
Starting with Emacs 22, command
‘icicle-Info-goto-node’ lets you type multi-completion input whose second part (after
‘C-M-j’) is a content-searching pattern (regexp). This means you can search a set of nodes (or an entire manual) and choose from the list of matching nodes. The
‘*Completions*’ candidates you see are just the node names. After you choose one of the matching nodes to visit, you can use
‘C-M-s’ to find each match of the content-search pattern. See Icicles - Searching Named Containers.
When you are looking for something in an Info manual,
‘icicle-Info-index’) is your friend. It is typically better than brute search (
‘C-M-s’), because a human has decided what topics to add to the index based on understanding user/reader needs.
Naturally, a single Info node can be indexed under multiple topics. And some of those index entries might even represent the same topic, using different word order or terminology.
Suppose you are looking up information about Emacs fringe, for example. You might type
‘i fringe S-TAB’ to see all indexed topics with the substring
‘fringe’. But because of double-entry indexing, several of the topics matching your input can take you to the same node.
When you are investigating a topic this way you might want to visit different nodes that are pertinent to the same topic. But how can you tell whether you have already visited a node that one of the matching topic candidates takes you to? Icicles highlighting of past inputs does not help here. What matters is not whether you have entered a given topic previously but whether you have already visited a given topic’s node.
Icicles can also help here, by highlighting the topics whose nodes you have visited. It uses face
‘icicle-historical-candidate-other’ for this (not face
‘icicle-historical-candidate’). (This feature is not available for Emacs 20 or 21.)
But because it takes extra time to track down each of the current topic candidates, this can be costly. You can customize option
‘icicle-Info-visited-max-candidates’ to control the behavior. This extra highlighting is skipped whenever there are more candidates that the option value. It is also skipped if you turn off historical candidate highlighting altogether, by setting option
You can take advantage of Icicles set operations to create your own virtual Info books. That is, you can define and save sets of Info nodes or Info index entries, and then reuse them later.
‘g’ in Info use nodes as candidates, so you can use
‘g’ or a combination of
‘g’ to define a node set, and you can use either
‘g’ to reuse a node set. A set of index entries is different: You must use
‘i’ to create and reuse such a set.
Remember that you can define a candidate set incrementally, adding more elements using `
‘mouse-1 mouse-3 mouse-3’. And you can save a candidate set persistently. [*]
You can even create a virtual book that includes Info nodes from different manuals. For example, you might want to collect together specific nodes that deal with some particular topic, such as faces, from both the EmacsManual and the ElispManual.
You do this using
‘C-u g’ (a plain prefix argument). This prepends the Info file name (book identifier) to each node-name completion candidate. For example, when you are in the Emacs manual, each node candidate is prefixed by `
(emacs)’, and in the Elisp manual each candidate is prefixed by `
(elisp)’. You define a set of candidates in the usual Icicles ways, changing manuals as needed to add additional nodes to the set you save.
A node name prefixed by its file name is analogous to an absolute file name, that is, a relative file name prefixed by its directory. Because such a saved candidate has a book prefix, e.g. `
(emacs)’, it is absolute and unambiguous. You can use it wherever you happen to be in Info, to go directly to that node. This is a feature of
‘g’ even in vanilla Emacs: you can go to a node in a different manual from the one you are currently visiting.
When you want to reuse a virtual book, hit
‘g’ again, retrieve the saved set of node candidates that defines the book, and navigate among the saved nodes.
If you use library info+.el, you can also take advantage of its definition of virtual books and saved Info nodes. That library defines command
‘Info-virtual-book’, which opens Info on a Table of Contents of a virtual book of nodes that you have saved either using command
‘Info-save-current-node’ or by customizing user option
‘Info-virtual-book’ by letting you define the virtual book nodes using completion. That is, you can use
‘g’ to save a set of node-name completion candidates (as the value of variable
‘icicle-saved-completion-candidates’), and then use command
‘icicle-Info-virtual-book’ to open an Info buffer with those nodes as a menu.
If you have not saved any node-name candidates, then
‘icicle-Info-virtual-book’ acts the same as
‘Info-virtual-book’: it opens the virtual book that is defined by
‘Info-saved-nodes’. With info+.el, the key `
.’ adds the current node to
‘Info-saved-nodes’, which gives you a convenient way to build up a virtual book as you read. This is like Emacs bookmarking, but it keeps your saved Info nodes separate from your other bookmarks.
With a prefix argument,
‘icicle-Info-virtual-book’ lets you choose a persistently saved completion set to use instead of
‘Info-saved-nodes’. This means that you can have any number of such saved node sets as virtual books, to use at any time.
[* If you click
‘mouse-1’ on a candidate and (starting with Emacs 22)
‘mouse-1-click-follows-link’ is an integer, then you will need to hold the mouse button depressed longer than that many seconds, or else that candidate will simply by chosen. If the value is
‘t’, then this will not work at all. Any other value presents no problem. (Personally, I use
Icicles searching (
‘icicle-search’) is not Isearch. It searches for all matches in the portion of text you tell it to search. This means that you cannot use it to search an entire manual in one operation, unless you have the entire manual available in a single buffer to be searched.
So, when you use
C-c `’) to search with InfoMode, you are limited to a few options:
‘C-x n w’), to use it on an entire Info file. However:
The idea is to flatten a subtree of Info nodes – possibly an entire manual, but more typically a node and its children – and then use
C-c `’) over that flattened document. What is needed is a command that flattens Info subtrees. InfoPlus provides such a command,
‘Info-merge-subnodes’, and binds it to `
+’ in InfoMode.
You can control how you want the flattening to occur, by using different values of prefix argument. For searching, you probably want complete flattening of the chosen subtree, in a single buffer, so you use a prefix arg of zero: `
C-u 0 +’.
This does not replace the
‘*Info*’ buffer that you started with; it creates a new buffer, named after the root node of the subtree you flattened. A principle use of
‘Info-merge-subnodes’ is to print out a manual or a portion of it. Also, I wrote a library (mkhtml.el, outdated now) that lets you convert the result to HTML.
In sum, you can use Icicles search in Info: `
C-u 0 +’, then `
One caveat, however: You will generally want to limit your search to a reasonably small subtree of a manual, instead of flattening and then searching the entire manual. Flattening a large manual can take a while: it took me 10 minutes to flatten the Emacs Manual. Of course, you could flatten a large manual once, and save the result in a file for later searches.
Obviously, flattening in order to search is less convenient than using manual-wide incremental search (
‘C-s’) with Info (starting with Emacs 22), and it is often less convenient than using
‘Info-search’ (bound to
‘s’ in Info). Icicles searching is different from both, and it has its advantages and disadvantages. When you want the advantages of Icicles searching in Info, the flattening hack can be useful. When you do not need those advantages, other search methods can sometimes be more appropriate.
|Previous: Icicles - Dired Enhancements||Icicles||IciclesIndex||Next: Icicles - Support for Projects|