If you’re familiar with regions in Emacs, then you should consider the rectangle commands – a way of marking the region across lines, but operate on it in a column-intelligent manner. A character in a line is a “column”. Rectangles are edits on portions of the region between two buffer columns. The EmacsManual reads,
For example, running
‘set-mark-command’) in column 3 of the buffer, and then moving down 4 lines and to column 8, will cover a rectangle that is 23 characters – 4 * (8 - 3 + 1) - 1. The location of the mark and the point can be interchanged, the mark does not have to be to the left of the point.
If you were to move down 4 lines but stay in the same column of 3, you would be in a rectangle of 0 characters. The “empty rectangle” is important for inserting a rectangle of text across the lines.
A good way to approach rectangles is to consider them a text-version of the “crop selection” tool one encounters in a graphics program or drawing tool. Use of rectangles is somewhat akin to operating on a narrowed portion of the buffer where the narrowing is from column number A → B instead of between point and mark.
Rectangle commands were originally part of Emacs’s PictureMode and therefore were intended as handlers on visual rectangles of data. Rectangles are useful in situations where editing is otherwise unnecessarily difficult, frustrating, or region-oriented Emacs commands are lacking.
One typically utilizes rectangles in a manner similar to that of the region. Rectangles can be killed or copied onto the kill ring which is convenient for yanking rectangles into ordinary buffers. As buffer objects, rectangles are fundamentally different from the region and aren’t afforded the same status. Moreover, this difference is orthogonal to most of the Emacs commands that operate on the region and rectangles can not be relied upon to always “Do the right thing”. This is in contrast to insertion of region registers which honor buffer markers and don’t clobber buffer text unless it was intended. See Registers below.
Because rectangles are a second-class citizen, using them programmatically in Elisp functions should be approached with caution especially with newer versions of Emacs (23 and later) which depart from a static line and column orientation buffer display with fixed width fonts and where 80 columns of text isn’t always 80 columns. Despite these detractors rectangles remain exceedingly useful for certain types of edits.
The EmacsManual explains how to use this feature.
Rectangle commands were originally part of Emacs’s PictureMode.
‘C-x r k’
‘C-x r y’
‘C-x r t’
‘C-x r d’
‘C-x r o’
‘C-x r N’. This command also inserts a column of spaces after numbers.
When copying and pasting tabular data from a Web page rendered in a Web browser, you often will get more than just what you want copied to the clipboard. Bring the text into Emacs – unless you were in Emacs already. If you want only one or some of the columns of the data, use the rectangle commands of Emacs. Hit
‘C-SPC’ at the beginning of the first entry in the column you want, and then move to the final entry in the last tabular column you want, then hit
‘C-x r k’. This kills the rows of the column(s) you’re interested in.
To move the columns you want to an external application like LibreOffice, Gnumeric or back to the Web browser, you’ll need to kill the text in Emacs so it is in the clipboard – it won’t make it there with the rectangle kill command. Switch to the
*scratch* buffer or open some temporary buffer and yank the rectangular text with
‘C-x r y’, then kill the result regularly with
‘C-k’. It’s then ready to paste into the application. A little bit of trouble, but it’s well worth it.
A similar scenario where rectangular commands are useful is working with a database like MySQL or PostgreSQL.
After running some quick database queries that someone else needs, you run a query that selects a lot of columns for your verification but you’re only interested in only one or just a few of the columns. Rather than rewriting the query and re-executing it, or using Unix tools to programmatically extract the values, use the interactive rectangle commands of Emacs to extract the column(s) needed. Why bang on your database when your data is right there in the Emacs buffer ready for manipulation?
Many commands in the shell produce output in a column delimited format, for example the information and statistics about processes running in the operating system or the long, verbose format of file listings. Another fixed-column format are list of files located in a common path. For example,
/usr/share/emacs/22.2/etc/images/icons/emacs_32.png /usr/share/emacs/22.2/etc/images/icons/emacs_24.png /usr/share/emacs/22.2/etc/images/icons/emacs_16.png /usr/share/emacs/22.2/etc/images/icons/emacs_48.png /usr/share/emacs/22.2/etc/tree-widget/default/no-guide.png /usr/share/emacs/22.2/etc/tree-widget/default/leaf.png /usr/share/emacs/22.2/etc/tree-widget/default/end-guide.png /usr/share/emacs/22.2/etc/tree-widget/default/open.png /usr/share/emacs/22.2/etc/tree-widget/default/empty.png /usr/share/emacs/22.2/etc/tree-widget/default/close.png /usr/share/emacs/22.2/etc/tree-widget/default/handle.png /usr/share/emacs/22.2/etc/tree-widget/default/no-handle.png /usr/share/emacs/22.2/etc/tree-widget/default/guide.png /usr/share/emacs/22.2/etc/tree-widget/folder/no-guide.png /usr/share/emacs/22.2/etc/tree-widget/folder/leaf.png /usr/share/emacs/22.2/etc/tree-widget/folder/end-guide.png /usr/share/emacs/22.2/etc/tree-widget/folder/open.png /usr/share/emacs/22.2/etc/tree-widget/folder/empty.png /usr/share/emacs/22.2/etc/tree-widget/folder/close.png /usr/share/emacs/22.2/etc/tree-widget/folder/handle.png /usr/share/emacs/22.2/etc/tree-widget/folder/no-handle.png /usr/share/emacs/22.2/etc/tree-widget/folder/guide.png
You can delete the redundant text, “
‘C-x r d’, making:
images/icons/emacs_32.png images/icons/emacs_24.png images/icons/emacs_16.png images/icons/emacs_48.png tree-widget/default/no-guide.png tree-widget/default/leaf.png tree-widget/default/end-guide.png tree-widget/default/open.png tree-widget/default/empty.png tree-widget/default/close.png tree-widget/default/handle.png tree-widget/default/no-handle.png tree-widget/default/guide.png tree-widget/folder/no-guide.png tree-widget/folder/leaf.png tree-widget/folder/end-guide.png tree-widget/folder/open.png tree-widget/folder/empty.png tree-widget/folder/close.png tree-widget/folder/handle.png tree-widget/folder/no-handle.png tree-widget/folder/guide.png
As with regions, rectangles too can be stored to Registers though the interface to this feature is fussy in relation to other types of registers which manipulate/store buffer text in a separate manner than rectangles which are represented by a special list of strings.
When a register contains a rectangle, and that register’s rectangle is inserted with
‘insert-register’ the rectangle is inserted with its upper left corner at point. Use of rectangles in conjunction with registers is a powerful combination for managing columnar oriented data (think spreadsheets and tables). The caveat is that when rectangle registers are inserted their text is inserted in the current line and underneath it on successive lines overwriting the existing buffer content.
I’d say that the “overwriting” behavior of rectangle registers is consistent with
‘yank-rectangle’, so I see no problem with this. Is there something I’m missing? – AaronHawley
It is consistent with
‘yank-rectangle’. However, it is inconsistent with
‘insert-register’. – mon_key
Unfortunately, the design of registers in Emacs is to “do the right thing” with what ever “object” is in the register – point, window, frame, number, text or rectangle. I can understand your point. You’re probably suggesting there be a method for inserting a rectangle on lines of their own. It would be desirable for registers to behave this way with rectangles to handle your wish. I know I have to run
‘open-line’ many times to make room, instead. – AaronHawley
Sometimes one wishes to kill a rectangle without actually deleting it. It’s certainly trivial enough to undo the
‘kill-rectangle’ command immediately afterwards and there is a way to copy a rectangle into Registers with
‘C-x r r’, but here is a function (which simply takes advantage of what kill-rectangle does in a read-only situation) and a suggested key binding for consistency with
(defun my-copy-rectangle (start end) "Copy the region-rectangle instead of `kill-rectangle'." (interactive "r") (setq killed-rectangle (extract-rectangle start end))) (global-set-key (kbd "C-x r M-w") 'my-copy-rectangle)
Sometimes one wishes to replace a rectangle with another one. Currently this involves copying the source rectangle, deleting the destination rectangle, popping the mark and yanking. I need this often enough to create a dedicated command for this:
(defun yank-replace-rectangle (start end) "Similar like yank-rectangle, but deletes selected rectangle first." (interactive "r") (delete-rectangle start end) (pop-to-mark-command) (yank-rectangle)) (global-set-key (kbd "C-x r C-y") 'yank-replace-rectangle)
Yeah, you have to set point to the beginning of the rectangle when you delete, so that you are positioned to yank. That avoids the
‘pop-to-mark-command’. Your command only works when you mark the rectangle to delete with point at the end. – AaronHawley